Qbryte Cable Column Mini 375 cm with revolutionary clamping system! Easy to convert into an energy column

Add to cart
QBryte
Order larger quantities for up to 12% discount

The new Qbryte square aluminum cable column is equipped with a unique clamping system, which means that the cable column no longer needs to be screwed to the floor and ceiling. This construction is also called tension column. This stylish vertical cable duct makes it easy to hide the cables. As an option, this aluminum cable column is also available with sockets so that it forms an energy column, and a VESA mounting plate for screens or TVs. Due to its design, the vertical cable duct is ideally suited to be placed next to a desk in the office or reception area. The tensioning system integrated in the vertical cable tray is easy to adjust to length for a perfect fit.

Push the cable column only 2 centimeters upwards, tilt it away and then put it back in the reverse order at its new destination! This way you can place the tensioning column quickly and without any problems. Perfect for protecting and hiding all your cables from floor or workplace to ceiling and vice versa. The aluminum cable column is equipped with two cable channels that are closed with brushes. One of the sides is also equipped with an internal mounting rail, VESA plates and/or Bachmann power strips can easily be mounted on this mounting rail. With our vertical cable duct, your workplace will be a lot tidier and that of course works much more pleasantly.

  • Made from powder coated recycled aluminum
  • Colour: white (RAL 9016), black (RAL 9005), silver gray (RAL 9006 metallic)
  • Powder coated with microstructured mineral lacquer for a luxurious look
  • Length: 375 cm
  • Available in lengths 300 cm, 375 cm or custom-made up to a maximum of 375 cm! And by placing the pen further outwards, it is suitable for a ceiling up to 390 cm. Optionally, the tubes can also be extended by means of a coupling in the mounting rail.
  • Easy to cut to size yourself with a hacksaw
  • Can be installed within 15 minutes
  • Rubber foot and top supports, for firm installation without drilling and screws, also ideal for smooth subfloors such as PVC, marmoleum, natural stone, wood, etc.
  • The brush closure is made of mohair, which makes the bristles soft and will not bend quickly with intensive use. They return to original state
  • Two separate cable channels for, for example, power and network
  • You can easily create an energy column with the Bachmann Step sockets (with the mounting brackets developed for this purpose that fit the mounting rail).
  • With the VESA mounting plate you can quickly hang a screen on the cable column
  • Luxury Qbryte design and finish
  • Warranty: 10 years
  • Click here to view the manual
  • Watch the assembly video here

For the correct size, please inform us of Height-A and Height-B. We then saw the cable column to size and assemble the spring package so that you can place it immediately.

You can easily mount the cable column by pressing it against the ceiling, lifting it slightly and then putting it in place.
Qbryte kabelzuil mini netjes door systeemplafond

A stylish cable column that is mounted with a spring system
Qbryte kabelzuil mini met VESA adapter en monitor

With the optional VESA mount you can hang your monitor above your workspace
Qbryte kabelzuil mini met gekoppelde Bachmann Step contactdozen

With Bachmann Step sockets you have power directly at your workplace

Qbryte Cable Column Mini 375 cm in color RAL7048

Add to cart
QBryte
Order larger quantities for up to 12% discount

The Cable Column Mini is now available on a limited basis in RAL7048


  • Made from powder coated recycled aluminum
  • Colour: RAL 7048 matt, light beige
  • Powder coated with microstructured mineral lacquer for a luxurious look
  • Length: 375 cm
  • Available in lengths 275, 300 cm, 375 cm
  • Easy to cut to size yourself with a hacksaw
  • Can be installed within 15 minutes
  • Rubber foot and top supports, for firm installation without drilling and screws, also ideal for smooth subfloors such as PVC, marmoleum, natural stone, wood, etc.
  • The brush closure is made of mohair, which makes the bristles soft and will not bend quickly with intensive use. They return to original state
  • Two separate cable channels for, for example, power and network
  • You can easily create an energy column with the Bachmann Step sockets (with the mounting brackets developed for this purpose that fit the mounting rail).
  • With the VESA mounting plate you can quickly hang a screen on the cable column
  • Luxury Qbryte design and finish
  • Warranty: 10 years
  • Click here to view the manual
  • Watch the assembly video here

Bachmann Step power strip with RIM-earth, provided with material for mounting on Qbryte Mini Column/Energy Column and Tube Column V2

Add to cart
Bachmann

Mounting system for the Bachmann Step power strips for mounting on the aluminum cable column mini and tube column V2 to create an energy column.
Quick assembly possible thanks to the GST18 cables and the included tools. Verison with with RIM-earth for Netherlands, Germany etc

Suitable for the 3,4 and 5 point sockets from Bachmann Step. You can also mount the power strips coupled, for 6,8,10 or more sockets on the vertical cable duct, so that you can easily create an energy pole.
Each power strip is provided with mounting brackets for the Qbryte cable column mini including bolts, nuts and Allen key.
•Mounting possible on one side of the cable column
•Each power strip equipped with mounting system for Cable Column Mini
•Click here to view the installation manual
•Watch the assembly video here
•Video: mounting the GST18 intermediate cable
•Video: suitable for 3 to 6 boxes

All parts are included

Mount the brackets to the power strip and the bolts and nuts through the holes

Place the power strip on the rails and tighten the bolts

Bachmann Step power strip with earth-PIN, provided with material for mounting on Qbryte Mini Column/Energy Column and Tube Column V2

Add to cart
Bachmann

Mounting system for the Bachmann Step power strips for mounting on the aluminum cable column mini and tube column V2 to create an energy column.
Quick assembly possible thanks to the GST18 cables and the included tools. Version with earth-PIN for Belgium and France, among others.

Suitable for the 3,4 and 5 point sockets from Bachmann Step. You can also mount the power strips coupled, for 6,8,10 or more sockets on the vertical cable duct, so that you can easily create an energy pole.
Each power strip is provided with mounting brackets for the Qbryte cable column mini including bolts, nuts and Allen key.

All parts are included

Mount the brackets to the power strip and the bolts and nuts through the holes

Place the power strip on the rails and tighten the bolts

Bachmann Step ALU power strip with RIM-earth , provided with material for mounting on Qbryte Mini Column/Energy Column and Tube Column V2

Add to cart
Bachmann


Mounting system for the Bachmann Step power strips for mounting on the aluminum cable column mini and tube column V2 to create an energy column.
Quick assembly possible thanks to the GST18 cables and the included tools.

2 fixed sockets and 2 self-chosen fillings.

Here you see an example with 2 sockets, a double USB charger (total 15.5W) and a double UTP cat6A connection.

The Bachmann Step Alu with 2 self-selectable inserts and mounting set for the Cable Column-Mini and Tube Column V2. You can also mount the socket blocks together, for 8 or more socket outlets on the vertical cable channel to easily create an energy pole.

Each power strip is provided with mounting brackets for the Qbryte cable column mini including bolts, nuts and Allen key.

All parts are included

Mount the brackets to the power strip and the bolts and nuts through the holes

Place the power strip on the rails and tighten the bolts

Bachmann Step ALU power strip with earth PIN, provided with material for mounting on Qbryte Mini Column/Energy Column and Tube Column V2

Add to cart
Bachmann


Mounting system for the Bachmann Step power strips for mounting on the aluminum cable column mini and tube column V2 to create an energy column.
Version with earth-PIN for Belgium and France, among others.

2 fixed sockets and 2 self-chosen fillings.

Here you see an example with 2 sockets, a double USB charger (total 15.5W) and a double UTP cat6A connection.

The Bachmann Step Alu with earth-PIN with 1 or 2 customizable inserts and mounting set for the Cable Column Mini and Tube Column V2. You can also mount the power strips together, for 4 or more outlets on the vertical cable tray so you can easily create an energy pole.
Each power strip is provided with mounting brackets for the Qbryte cable column mini including bolts, nuts and Allen key.

All parts are included

Mount the brackets to the power strip and the bolts and nuts through the holes

Place the power strip on the rails and tighten the bolts

VESA plate with material for mounting on Qbryte Mini Column/Energy Column and Tube Column V2

Add to cart
QBryte
With this VESA adapter for the Mini Cable Column and Tube Column V2, you can easily hang a screen. This way you can immediately hide the cables neatly via the vertical cable duct.

Easy mounting on the adapter rail in the mini cable column or tube column V2. Suitable for monitors with a VESA mounting of up to 100x100mm.

  • Including the necessary bolts for mounting on the profile.
  • Mounting possible on one side of the cable column

Quick mounting on the cable column
monteer de boutjes en hamerkopmoeren
install the bolts and hammer head nuts on the plate

and tighten it with the supplied Allen key

Extra metal sleeve for Kabelzuil mini & office

Add to cart
QBryte
Extra steel sleeve for Qbryte vierkante kabelzuil mini or  kabelzuil office

With this cuff / rosette finish you can e.g. finish the grommet on your desk.

  • material: steel, 2 mm thick
  • 2-part, including mounting ring
  • colour: white textured lacquer
  • inside dimensions: 47,5 x 47,5 mm

Extra plastic sleeve for Kabelzuil mini & office

Add to cart
QBryte
Extra sleeve for Qbryte vierkante kabelzuil mini or  kabelzuil office

With this cuff / rosette finish you can e.g. finish the grommet on your desk.

  • material: plastic, abs
  • 2-part
  • colour: white textured lacquer
  • inside dimensions: 47,5 x 47,5 mm
  • thickness: 3 mm